10 Best Digital Multimeters For Engineers

SaveSavedRemoved 0
Deal Score0
Deal Score0

1. Mextech MAS830L 3 Digit, 1999 Counts

3 digit, 1999 Counts, 600 AC/DC voltage, accuracy: ±0.8% rdgs (DC Volt), ±1.2% rdgs (AC Volt), 10 DC current, 2000 K. Resistance, backlight, diode check, buzzer sound, coutinuity and diode test, transistor hFE. Safety Measures for MAS830L: Failing these Precautions May Lead to Instrument Damage – Always make sure the Test Probes are fitted in the correct sockets (Specially while measuring AC Voltage ) – Please choose the correct measuring option before you connect the probe. (As a thumb rule always choose the greater value and decrease if required) – While measuring current, make sure to put the Red Probe in “10A” socket and the measuring connection should be in “Series” – While measuring all other parameters other than Current (Ampere), the measuring connection should be in “Parallel” – If by mistake a wrong connection or option is selected and the measurement is initiated, the instrument will Blink / Beep. Remove the connections immediately to restrict the damage to minimum – The instrument can only be used in conjunction with the probe for the compliance with safety standards. If the probe needs replacing due to damage, the replacement must be of the same type or the same electrical specifications – Do not exceed the input limits specified for each range – When the instrument is measuring, do not touch the input terminal not in use – When a measurement range is uncertain, turn the function/range switch to the maximum range position

Mextech MAS830L 3 Digit, 1999 Counts, 600 AC/DC Voltage Digital Multimeter 

This is a 3½ Digits Multirange multimeter with Backlight. It Perform AC/DC Voltage, DC Current, Resistance etc.

  • Display: 3 ½ digit display with 1999 counts 
  • Over Range Indication: “1” 
  • Operating Temperature Humidity: 0⁰C to 40⁰C < 75% RH 
  • Storage Temperature Humidity: -10⁰C to 50⁰C< 75% RH 
  • Polarity Indication: Displayed For Negative Polarity
  • Data hold Function
  • Back Light
  • Low Battery Indication

2. Generic DT830D Small Digital Multimeter, 

Yellow

​​​​​Small multi meter for your day to day needs. If you have basic knowledge about multi meters you can try this small multi meter for basic continuity checks and voltage measurements. When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer and battery, connect the red test lead to V 0 mA jack and black test lead to COM jack.When testing the current more than 200mA, connect the red test lead to OADC jack and black test lead to COM jack.When testing the temperature, connect the temperature probe to V 0 mA jack or COM jack. Please refer to the attached instruction manual for the operating instructions.

Product description

  • To avoid possible damage to the meter or to the equipment under test, follow these guidelines:
  • Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
  • Use the proper terminals, function, and range for your measurements.
  • Before measuring current, check the meter’s fuses and turn power off to the circuit before connecting the meter to the circuit.
  • Before rotating the range switch to change functions, disconnect test leads from the circuit under test.
  • Before attempting to insert transistors for testing, always be sure that the test leads have been disconnected from any measurement circuits.
  • Remove test leads from the meter before opening the Meter case.
  • To avoid possible damage to the meter or to the equipment under test, follow these guidelines:
  • Disconnect circuit power and discharge all high-voltage capacitors before testing resistance, continuity, diodes, or capacitance.
  • Use the proper terminals, function, and range for your measurements.
  • Before measuring current, check the meter’s fuses and turn power off to the circuit before connecting the meter to the circuit.
  • Before rotating the range switch to change functions, disconnect test leads from the circuit under test.
  • Before attempting to insert transistors for testing, always be sure that the test leads have been disconnected from any measurement circuits.
  • Remove test leads from the meter before opening the Meter case.

3. Hao Yue D830D Digital Multimeter LCD AC

DC Measuring Voltage

Small multimeter for your day to day needs. If you have basic knowledge about multimeters you can try this small multimeter for basic continuity checks and voltage measurements. When testing DC voltage, AC voltage, DC current, resistance, diode, buzzer and battery, connect the red test lead to V 0 mA jack and black test lead to COM jack. When testing the current more than 200mA, connect the red test lead to OADC jack and black test lead to COM jack. When testing the temperature, connect the temperature probe to V 0 mA jack or COM jack. Please refer to the attached instruction manual for the operating instructions.

DC Voltage Measurement

Set the range switch to the desired V= range. If the voltage is not known beforehand, set the range switch at the highest range position and then reduce it range by range until satisfactory resolution is obtained.

AC Voltage Measure

 Connect the red test lead to the VΏmA jack and the black test lead to the “COM” jack.

Resistance Measurement

Set the range switch to the desired Ώ range. If the resistance is not known beforehand, set the range switch at the highest range position and then reduce it range by range until satisfactory resolution is obtained.

Diode & Continuity Measurement

Set the range switch to the Continuity range. (Symbol like Diode/Arrow).Connect the red test lead to the anode of the diode to be tested and the black test lead to the cathode of the diode.

(Caution:This is a very basic multimeter suitable for indoor and small applications. It is not recommended to use this for professional use.)

              SOME OTHER BEST MULTIMETER :

Mastech MAS830L Digital Pocket Multimeter    CLICK HERE

Fluke 101 Pocket Digital                                          CLICK HERE

Meco 27-Auto Digital Clamp Meter                        CLICK HERE

Generic Digital LCD TDS Meter                               CLICK HERE

We will be happy to hear your thoughts

Leave a reply

X
BhaariSale.in
Login/Register access is temporary disabled
Compare items
  • Total (0)
Compare